laufen CLEANET RIVA Kurzanleitung Seite 21

MEASURE THE WATER HARDNESS
1 sec
GENERAL SETTINGS
English
15-25 °fH, 8.4-14 °dH
ECO
1
SPECIAL FUNCTIONS
Measure the water hardness at the place of installation using
the enclosed test strip.
Hold the test strip in tap water for 1 second.
Shake the test strip and wait 60 seconds.
Compare the colour of the test strip with the table below.
Measured wather hardness Setting on the appliance
°dH °e (°Clark)
1 °fH 0,560 0,702
8,4 10,5
15 °fH
25 °fH 14
35 °fH 19,7 24,6
SAVE THE WATER HARDNESS
The installer may have already commissioned the settings
during the remote control setup.
Activate the touch screen remote control by pressing the
start button at the top right.
Press «General settings» to access the
default settings.
Select the measured water hardness by pressing
the «Water hardness» symbol repeatedly.
The following ranges are available for selection:
< 15 °fH, < 8,4 °dH; 15 – 25 °fH, 8,4 – 14 °dH;
25-35 °fH, 14 – 19,7 °dH; > 35 °fH, > 19,7 °d
Press «Save».
< 15 °fH, < 8,4 °dH
< 15 °fH, < 8,4 °dH
15–25 °fH, 8,4–14 °dH
25–35 °fH, 14-19,7 °dH
> 35 °fH, > 19,7 °dH
> 35 °fH, > 19,7 °dH
°rH ppm (°aH)
3,986 10
59,8 150
17,6 99,7 250
139,5 350
Press "Menu" to return to
the main menu.
EN
mmol/l
0,1
1,5
2,5
3,5
21