Demeyere Ourson Montageanleitung Seite 3

1) Height-adjustable bed base:
a. The lowest position is the safest
b. WARNING - As soon as baby is capable of sitting up, the base should be moved down to
the LOWEST POSITION.
2) Choose a 1200mm x 600mm mattress. Due to the risk of suffocation, the space in length and
width between the mattress and the sides/ends of the bed should not exceed 30mm.
Warning: do not use more than one mattress at the same time.
3) Baby's mattress should be no more than 120mm thick to ensure a safety margin of 500mm in
the lower position and 200mm when raised.
4) You will find a marker (3 aligned holes) on the inside of one of the bed uprights. With the
mattress in the high position, use this marker to ascertain the mattress thickness not to be
exceeded.
5) Please familiarize yourself with the various assembly principles and hardware items outlined
in the assembly instructions.
6) Warning: cot should not be used if any elements are broken, damaged or missing and
replacement parts should be approved by the manufacturer.
7) Once the locking mechanisms have been set and checked the cot is ready for use.
8) Screws and fixings must always be tightened properly, to prevent drawstrings, ribbons or
necklaces, etc. catching on them and reduce the risk of suffocation and strangulation. They
should be checked on a regular basis.
9) Warning: Do not leave anything in the cot and place it at a suitable distance from any object
which could provide a foothold for the child or present a risk of suffocation or strangulation,
for example cords or curtain tie-backs, etc.
10) Warning: Please ensure that the cot is not positioned in the vicinity of an open flame or other
source of intense heat, e.g. electric or gas heaters, etc.
11) Not suitable for children over 15kg. To prevent falling, this cot should not be used by children
who are capable of climbing out unassisted.
12) Barriers are made from massive wood; the aspect of surface can vary
Retain for future reference
Please read carefully.
.
3/16