Function Modes - Timberland 15517J Bedienungsanleitung

B. Function Modes
C Key C Key
Alarm mode
Real time mode Stopwatch mode
1. Press button C to change mode (except in setting mode), Press button A to turn on the EL backlight
for 3 seconds.
2. Stopwatch mode
- In Stopwatch mode, press button A to start and stop the counting. When the stopwatch is stopped,
press button B to reset the counter.
- When the stopwatch is counting, press button B to take the Split time (" SP" will be displayed),
after take the first lap time, press button B to resume the counting. Press button A to stop the counter
and take the final time, press button B to reset the counter.
LIGHT / START / STOP (button A)
SPLIT / RESET (button B)
MODE (button C)
A. Features
- 12 digits display which shows: hour, minute, second, date, month, day of week
- Alarm and chime
- With snooze function
- With 12/24 time format
- 1/100 second stopwatch
- EL backlight
3. Alarm and chime mode
- In Alarm mode, press button A to toggle the Alarm and chime, the sequence is : Alarm ON, both ON,
Chime ON, both OFF. The related icons will be displayed accordingly. When the alarm is ringing, the icon
will flash and the sound will ring for 20 seconds.
- Alarm setting : press button B, the "HOUR" will being flashed for editing, press button A to advance the
C Key
figure, after finished then press button B again to edit the "MINUTE", press button B to finish the whole
setting, press button C to return to Real Time mode.
- When the alarm is ringing, press button C to turn on the "Snooze" function, the alarm will ring for
20 seconds in next 5 minutes. Press button A or B to stop the ringing.
Time setting mode
4. Time Setting mode
- In the Time Setting mode, the "Second" digits will flash for editing, press button A to reset the digits to
zero if necessary, press button B to edit the other value; the setting sequence is : Second, Hour, Minute,
Month, Date, Day of week. When the value is flashing, press button A to advance the figure, press button B
to confirm and edit the next value. After finished the setting, press button C to return to Real time mode.
- When setting the "Hour", press button A to advance figure, A/P will be displayed in 12-hour format, "H"
will be displayed when in 21-hour format.
- When setting the "Second", if the current value is in between 30-59 second, the value will be set to zero
and the "Minute" will be advanced by 1; if the value is in between 00-29 second, the "Minute" value will not
be changed when the "Second " is reset.
Normal position, watch runs
Time setting:
Set to the correct time.
Push crown back to
position 1.