Suntec Wellness KLIMATRONIC AIR BOOSTER 2000 Bedienungsanleitung Seite 10

Operation
1. Insert the plug into the socket and turn on the Air Booster 2000. The indicator light will turn on.
The Air Booster is ready to work.
2. Turn the temperature control knob to the max position clockwise (to the bottom).
Turn the function adjust knob to position "I" or "II" to start warm wind funktion.
3.
4. Stop the warm wind function by turning the function adjust knob to position
5. Turn function adjust knob to position "0" to turn off the Air Booster 2000.
Constant temperature indicator
When the room temperature reached the desired temperature the Air Booster 2000 will keep it by
turning on and off.
Find the ideal temperature as follows:
First turn the temperature adjust knob to it's max position (turn clockwise until the knob stops)
-
- Once the temperature is comfortable, please reduce the setting temperature.
High temperature protect device
In order to avoid damage and danger because of high temperature, the Air Booster 2000 is
equipped with hot temperature protect device. When the set temperature is too hot the unit will
turn off automatically.
If it happened, please proceed as follows:
- Turn function adjust knob to position "0".
- Unplug the unit from the power supply.
- Let the Air Booster cool down for about 5-10 minutes
- Turn it on again if needed.
Maintenance and care
1. Turn function adjust knob to position "0" to turn off the unit.
2. Unplug the unit from the power socket.
3. Let the unit cool down completely.
4. Clean the unit with a soft, damp cloth. Do not immerse into water or other liquids.
5. Never use abrasive or acidic cleaners. This can damage the device's plastic body.
6. If the device is not used, store it in a clean, dry place.
Trouble shooting
The unit does not heat anymore:
1. Please check if the plug is damaged.
2. The temperature adjust knob is not set to the max position (clockwise to the bottom).
Function adjust knob is not turned to position "I" or "II".
3.
.