Plug-in Timer
Art.no 18-2023
Model 11GW/3A-UK
36-2899
Please read the entire instruction manual before using the product and save it for future reference. We reserve the right
for any errors in text or images and any necessary changes made to technical data. If you have any questions regarding
technical problems please contact our Customer Services.
Safety
• Electrical devices connected to the timer switch
should be intended for use with a 230 V AC,
50 Hz power supply.
• The timer is only intended for indoor use.
• Make sure that the plug is pressed all the way into
the timer switch.
• Do not expose the timer to moisture or splashes.
• Ensure that the connected appliance does not pose
a fire hazard.
• If you need to clean the timer, disconnect it from
the mains and wipe it clean with a dry towel.
Do not use water or any other liquid for cleaning.
Product description
Week timer. Minimum timer activation time: 1 hr and
45 min (each tappet represents 1 hour and 45 min).
Switch for selecting timer control or continuous
wall outlet function.
1.
Time segment tappets
2.
Current time indication arrow
3.
Selector switch
4.
Time setting dial
Operating instructions
Use as a standard wall plug
Set the selector switch (3) to the ( | ) position. Connect the light,
appliance, etc. and make sure that it is turned on.
Timer controlled
The settings dial (4) has the days of the week along with
the hours in a day (2, 6, 10, 14, 18 and 22).
GREAT BRITAIN • CUSTOMER SERVICE
tel: 0845 300 9799 internet: www.clasohlson.com/uk
e-mail customerservice@clasohlson.co.uk
11GW/3A
2
4
3
1
Setting the timer
Example: If you want the timer to activate at 6 pm (18:00)
on Wed and turn off at 2 pm (14:00) on Thur: Press in
the 12 tappets from 18 on WEDNESDAY to 14 on THURS-
DAY. The timer will then be activated between 6 pm on
Wed to 2pm on Thur. With this setting, the timer will not
reactivate until 6 pm the following Wed.
Setting the current time
1.
Set the current time by turning the dial clockwise until
the arrow is aligned with the current time (2).
2.
Set the selector switch (3) to the ¿ position.
Troubleshooting
The connected
• Make sure that the product works
device does
by connecting it to a standard wall
not turn on.
outlet and test if it works.
• Make sure that the connected
product is turned on.
The product
Make sure that the selector switch (3)
doesn't seem
is in the ¿ position.
to work off
the timer.
The product is
on all the time.
Disposal
This product should be disposed of in accordance with
local regulations. If you are unsure how to proceed,
contact your local authority.
Specifications
Rated voltage
Max resistive load
inductive load
Operating temperature
Accuracy
230 V AC, 50 Hz
36-2899: 16 A, 3,680 W
18-2023: 13 A, 3,120 W
max 460 VA
0–55 °C
± 35 minutes/day