Clas Ohlson 11GW/3A-UK Bedienungsanleitung

Plug-in Timer
Art.no 18-2023 Model 11GW/3A-UK
36-2899
Please read the entire instruction manual before using the product and save it for future reference. We reserve the right for any errors
in text or images and any necessary changes made to technical data. If you have any questions regarding technical problems please
contact our Customer Services.
Safety
• Electrical devices connected to the timer switch should be
intended for use with a 230 V AC, 50 Hz power supply.
• The timer is only intended for indoor use.
• Make sure that the plug is pressed all the way into the timer
switch.
• Do not expose the timer to moisture or splashes.
• Ensure that the connected appliance does not pose
a fire hazard.
• If you need to clean the timer, disconnect it from the mains
and wipe it clean with a dry towel. Do not use water or any
other liquid for cleaning.
• Make sure that the electrical socket that the product
is plugged into is easily accessible in case it and
the connected product need to be quickly disconnected
from the mains electricity.
• Do not connect products of this type to each other.
• Do not cover the product.
Product description
Week timer. Minimum timer activation time: 1 hr and 45 min
(each tappet represents 1 hour and 45 min). Switch for
selecting timer control or continuous wall outlet function.
1. Time segment tappets
2. Current time indication arrow
3. Selector switch
4. Time setting dial
Operating instructions
Use as a standard wall plug
Set the selector switch (3) to the ( | ) position. Connect the light,
appliance, etc. and make sure that it is turned on.
Timer controlled
The settings dial (4) has the days of the week along with
the hours in a day (2, 6, 10, 14, 18 and 22).
UNITED KINGDOM • CUSTOMER SERVICE
tel 020 8247 9300 internet www.clasohlson.co.uk e-mail customerservice@clasohlson.co.uk
postal 10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZ
11GW/3A
2
4
3
1
Setting the timer
Example: If you want the timer to activate at 6 pm (18:00) on
Wed and turn off at 2 pm (14:00) on Thur: Press in
the 12 tappets from 18 on WEDNESDAY to 14 on THURSDAY.
The timer will then be activated between 6 pm on Wed to 2pm
on Thur. With this setting, the timer will not reactivate until 6 pm
the following Wed.
Setting the current time
1. Set the current time by turning the dial clockwise until
the arrow is aligned with the current time (2).
2. Set the selector switch (3) to the ¿ position.
Troubleshooting
The connected • Make sure that the product works by
device does not connecting it to a standard wall outlet
turn on. and test if it works.
• Make sure that the connected product
is turned on.
The product Make sure that the selector switch (3) is in
doesn't seem to the ¿ position.
work off
the timer.
The product is
on all the time.
Responsible disposal
This symbol indicates that this product should not
be disposed of with general household waste.
This applies throughout the entire EU. In order
to prevent any harm to the environment or
health hazards caused by incorrect waste
disposal, the product must be handed in for
recycling so that the material can be disposed
of in a responsible manner. When recycling your product,
take it to your local collection facility or contact the place of
purchase. They will ensure that the product is disposed of in
an environmentally sound manner.
Specifications
Rated voltage
Max resistive load
inductive load
Operating temperature
Accuracy
230 V AC, 50 Hz
36-2899: 16 A, 3,680 W
18-2023: 13 A, 3,120 W
Max 460 VA
0–55 °C
± 35 minutes/day