Vacuum Cleaning; Emptying The Dust Container; Cleaning And Care - Beem MIRAGE TORNADO CLEAN Bedienungsanleitung

EN
Crevice nozzle/Upholstery nozzle/
Textile brush
Connecting (see image D1/D2)
Remove the hand vacuum cleaner
‹
from the main body.
Insert the adapter into the hand vacu-
‹
um cleaner.
Insert the desired nozzle/brush onto
‹
the adapter.
Removing
Pull the nozzle/brush from the adapt-
‹
er.
Pull the adapter off the hand vacuum
‹
cleaner.

Vacuum cleaning

Using as floor vacuum cleaner
Connect the tube and the floor brush.
‹
Insert the hand vacuum cleaner into
‹
the main body.
Using as hand vacuum cleaner
Remove the hand vacuum cleaner
‹
from the main body.
Mount the desired nozzle onto the
‹
adapter.
Switching on the appliance
Insert the plug into the mains socket.
‹
Switch on the appliance by lightly
‹
pressing the on/off switch (2) on the
appliance.
Switching off the appliance
Switch on the appliance by lightly
‹
pressing the on/off switch (2) on the
appliance
Pull the plug out of the mains socket.
‹
BEEM - Elements of Lifestyle
Mirage Tornado Clean

Emptying the dust container

To empty the dust container (16), proceed
as follows:
Remove the hand vacuum cleaner
‹
from the main body.
Press the release button (15) and
‹
open the lid (1).
Pull the release latch (14) outwards
‹
and remove the dust container (see
image E1).
Empty the dust container (see image
‹
E2).
NOTE
► You can also remove the dust
container without removing the hand
vacuum cleaner from the main body.
If necessary, clean the dust container
‹
as described in the section Cleaning
the dust container.
Insert the upper part of the dust con-
‹
tainer into the hand vacuum cleaner
and subsequently press the lower part
tightly until it snaps in (see image G).
Close the lid (1) until it snaps in.
‹

Cleaning and care

Before beginning, pay attention to the
safety instructions in the Safety section!
Cleaning the appliance
Use a slightly moist cloth to wipe off
‹
the outside of the appliance housing
and the accessory parts.
19