AUROOM AURA 4,5 kW Installation Und Betriebsanleitung Seite 5

7. IMPORTANT ADDITIONAL INSTRUCTIONS:
- A suitable temperature for the sauna room is between 60–80 °C.
- Staying in the hot sauna for a longer time, makes the body temperature rise, which may be
dangerous.
- Do not sleep in sauna.
- You should be careful in the vicinity of the hot heater, because the stones and metal parts of the
heater may cause burns.
- Only a small amount of water (1-2 dl) should be thrown onto the heater stones, because the
steaming water is scalding hot.
- This equipment is not to be used by children or people whose physical and psychological traits,
mental functions, lack of experience or knowledge may hinder the safe operation of the equipment,
if the person who is responsible for safety cannot supervise them or instruct them in the use of the
equipment.
- Do not go to the sauna if you are under the influence of substances causing intoxication.
- Children may not be left unsupervised and they should be supervised to make sure they do not play
with the equipment.
- Always inspect the steam room before plugging in the heater.
- The improperly filed stone container is a fire hazard.
- Covering the stove will cause a fire hazard.
- Do not place any objects top over the heater or dry clothes near by the heater.
- Door and window must be closed when using the heater.
- The stainless steel casing may change its color because of the heat, which is normal behavior for
the material. Color changes are not covered by the warranty.
- Use normal domestic water for steam water. Do not use sea water (or other salty water) or
chlorinated water.
- Sea air and a humid climate fastens the corrosion of the heater.
- While measuring the insulation resistance of the sauna heater, the heater might leak.This is due to
moisture in the air having seeped into the insulating material of the heating resistors during storage
or transportation. The moisture will be removed from the resistors after a few heating times.
- Do not switch on the power supply to the electric sauna heater via a fault current switch!
- The highest temperature in the sauna cabin is always measured in the area above sauna heater.
The temperature sensor and safety device must be installed to the above-mentioned area as
described in manuals.
- The temperature sensor must be istalled in such way, that it does not get influenced by the cold air
coming from outside (e.g. door, window, ventilation).
- Please note that if the heater has a control switch, make sure it is not in use/ connected.
5
www.auroom.ee