Height Adjustment; Width Adjustment - Salli Swing Bedienungshandbuch

HEIGHT ADJUSTMENT

1
Seat up: Lighten your weight by reserving weight to your
feet on the floor and lift the height adjustment lever up.
When the seat height feels right, release the lever.
INCLINATION ADJUSTMENT
1
Hold onto the chair with your
hand and release the inclination
mechanism by lifting up the
inclination adjustment lever.
When adjusting the angle, press
or lift the seat by hand; at first the
mechanism is a little stiff.

WIDTH ADJUSTMENT

1
Open the locked mechanism
by hitting the lever briskly
sideways with your palm.
3
Lock the mechanism by
snapping the lever from right
to left.
CLEANING THE SEAT
Leather
Vacuum-clean regularly.
Leather stays clean and
beautiful longer if wiped
regularly with a damp cloth.
Clean stains immediately.
Use a damp cloth or paper
towel with some water
or mild cleanser. Special
leather conditioners can also
*Also ESD artificial leather
GAS SPRING CLEANING AND LUBRICATING
The base and the gas spring can be cleaned by wiping with a disinfectant cloth. If the gas spring
becomes slow or stiff, spray the narrow end of it with a universal lubricant.
IMPORTANT!
Salli Saddle Chair is designed for indoor use at normal room temperatures in a dry environment. For humid
environments we recommend the rustproof Salli Stainless. Normal metal parts will corrode if exposed to moisture.
We don't recommend genuine leather upholstery in a hospital environment or in comparable areas with clean room
requirements. In these areas, we recommend artificial leather or polyurethane upholstery. The chair must not be
used in hyperbaric oxygen therapy chambers due to the risk of explosion.
2
When the angle feels right,
release the lever to lock the
mechanism. In the best inclination
position you do not feel like you're
sliding forward or backward, and
your back gets a natural curve.
2
Move the seat parts into the desired
position by sliding them together or
apart .
Try the inclination and width adjustments in different
combinations to find the optimal adjustments for
you. It's recommended to keep the middle gap
open to minimize pressure in the pelvic opening.
be used. Some dyed textiles
might stain light-coloured
leather.
Artificial leather*
Wipe the stains with mild
soap and water. Let the
surface air dry. If you use a
solution containing alcohol,
test it first under the seat.
THE CONDITIONS OF USE AND MAINTENANCE OF THE CHAIR
2
Seat down: The seat is pressed down
by the weight of the user, when the
height adjustment lever is lifted up.
Salli SwingFit, Salli MultiAdjuster
ESD fabric
ESD fabric is best cleaned
by dry cleaning or with a
vacuum cleaner.
Polyurethane
Remove stains quickly
by using slightly alkaline
washing agents (max 5 % of
alcohol). Wipe the surface
Salli Twin, Salli MultiAdjuster
with a moist cloth and
lukewarm water, and wipe
dry if necessary. Do not use
strong alkalis, or bleaches
such as chlorite, acetone,
xylene, or strong vinegar.
3