Width Adjustment - Salli Professional Bedienungshandbuch

WIDTH ADJUSTMENT

1. Stand behind the chair. release the seat
width adjustment mechanism by hitting the
lever briskly with your palm (Picture 1).
2. Move the seat parts into the desired position
by sliding them together or apart (Picture 2).
3. Lock the mechanism by snapping the lever
from right to left. You may need to repeat the
procedure few times at the beginning, to find
the optimal adjustment for you.
SEAT WIDTH ADJUSTMENT PRINCIPLES
Optimal seat width adjustment varies with the user's individual physiology. we recommend keeping the middle
gap as wide as comfortably possible. The wider the gap, the less pressure to the sensitive ducts under the pelvic
floor.
LEATHER SEAT CARE AND CLEANING
The leather will stay clean longer if you wipe it every
now and then with a moist cloth.
remove stains immediately. wipe lightly with a cloth
or paper towel moistened with a mild soap and water
solution.
You can also clean the seat with products made for
leather furniture or riding equipment.
note that bleeding textiles may colour light-coloured
leather.
Marks on the leather and slight colour variations are
natural to genuine leather and do not affect the durability
of the product.
POLYURETHANE SEAT CARE
AND CLEANING
The Salli polyurethane seat and the gas cylinder can be
cleaned by wiping with disinfectant. Do not use a pres-
sure washer.
GAS CYLINDER CARE AND LUBRICATION
If the gas cylinder becomes slow or stiff, spray a light
coating of lubricant onto the thinner end of the gas
cylinder.
INCLINATION ADJUSTMENT
1) hold onto the chair with your hand and release the inclination mechanism by
lifting up on the lever (Picture).
In the best inclination position you do not feel like sliding forward or backward,
and sitting causes no pressure.
2) when the angle feels right, release the lever to lock the mechanism.
we recommend that you try the inclination and width
adjustments several times in different combinations to find
CASTOR REPLACEMENT
1.
2.
3.
If a castor stem remains caught in the base, grip
WEIGHT TOLERANCE
The recommended maximum weight for a Salli user is
120 kg (264 lbs), Salli Strong 150 kg (330 lbs).
Picture 1
the optimal adjustments for you.
Turn the chair sideways.
If you have strong hands, you can remove the
castors by pulling.
Otherwise you may need a lever, for example, a
chisel or a screwdriver which you place between
the castor and the base.
Push the new castors into place.
the stem with pliers and pull.
You may need to tap the pliers with a hammer
until the stem comes loose.
If your castors get stiff, replace them all.
Picture 2
EN
13