Taking Out Of Operation And Cleaning - Aura Allure Handbuch

Spray Tanning System Spray Tanning System Spray Tanning System
•
Prolonged hot baths and showers should be avoided in order to maintain the tanning
effect for as long as possible. Daily moisturisation of the skin is also recommended.

13. Taking Out of Operation and Cleaning

Clean the Spray Tanning System as required, but at the end of the working day/
i
application or before changing to a different colour as a minimum. Dried spray
tanning lotion makes cleaning more difficult and can even damage the system.
1) Turn system off with dial at 0.
2) Unscrew the container.
3) Pour any remaining spray tanning lotion
back into the original packaging.
4) Clean the container and feed tube with
a brush.
5) Clean the ventilating bore (Fig. 8, 1).
6) Pour water into the container. Screw
the container back on.
Do not use flammable materials for
cleaning purposes.
7) Turn system on with dial at 1 and spray
the water into a container or a cloth.
8) Repeat the above procedure until the
water emerging from the nozzle is clear.
9) Turn the system off.
10) Unscrew the container and empty. Pull
out the feed tub with container seal.
CAUTION! NEVER clean seals, nozzles or
air holes of the spray gun with
metal objects.
11) Unscrew the union nut and remove the
air cap and nozzle (Fig. 9). Clean the air
cap, nozzle seal and nozzle with a brush
and water.
12) Clean the outside of the spray gun and
container with a cloth soaked in water.
13) Assemble the parts again (see
"Assembly").
8
1
9
EN GB
9