Care; Plastic Parts - Vermeiren Ceres 3 Gebrauchsanweisung

CARE

Your scooter will require regular care if you want it to remain visually attractive also. Note the following
hints:
 COVERS
Clean the covers with hot water. You can remove stubborn dirt by washing with a mild commercial
detergent. Stains can be removed by using a sponge or a soft brush.
The textile cover is washable; use only a cloth moistened by a mild commercial detergent.
L
Do not use strong cleaning liquids like solvents, nor use hard brushes.
L
We shall decline all liability for damage caused by the use of improper cleaning agents.
L
Take care that you do not soak the covers.
L
Never use steam or pressure jets.


PLASTIC PARTS

Clean all plastic parts of your scooter with commercial plastic cleaners. Take note of special product
information.
 SURFACE LAYERS
The high quality of the surface layers guarantees optimal protection against corrosion. If the outer coat
is damaged by scratches or in other ways, treat the place with varnish obtainable from your specialist
dealer. Occasional greasing of the movable parts will ensure that you enjoy your scooter for a long
time. (do not use WD40 lubricating agents).
Initially the chrome parts only require rubbing with a dry cloth. Dull places or stubborn dirt should be
treated with a suitable chrome polish.
Dulling can be avoided by lightly greasing steel parts with Vaseline.
To guarantee the long-term preservation of your scooter, we recommend that you take it to your
specialist dealer for inspection once a year. These inspections can be confirmed in the "Service plan"
section.
L
The manufacturer shall decline liability for damage/injury caused by insufficient maintenance.
 ELECTRONICS
Wipe the steering unit with a cloth moistened by a few drops of a commercial domestic cleaner. Do not
use any abrasives or sharp-edged polishing equipment like a metal scrubber or brush, since these can
scratch the surface of the steering unit.
L
Regularly check the plug connectors for corrosion or damage, since it could affect the
efficiency of the electronics.
L
To avoid involuntary conduction of currents, remove the batteries before performing any
maintenance.
SCOOTERS Instruction Manual
Last updated: Jan-09
13