Pentair iCHLOR Bedienungsanleitung Seite 6

iCHLOR Plumbing Diagram
Plumbing the iCHLOR Salt Chlorinator:
• Always install the iCHLOR Salt Chlorinator AFTER the filter and heater. The iCHLOR should be no closer than 1m away
from the heater outlet.
• If the iCHLOR is installed on a pool/spa combination system, install (see diagram below) the iCHLOR BEFORE the pool/
spa return valve to allow proper chlorination of both the pool and spa and also to avoid creating gas traps in the pipes.
Note: For best flow, provide
at least 30 to 45cm of straight
pipe in front of the cell inlet.
6
NOT TO SCALE