asalvo BOOP Bedienungsanleitung Seite 9

1
OPENING OF THE CRADLE AND
LOCK TOP FRAME
- Remove the cradle of the carrying
bag and remove the pillow-top
mattress that surrounds it.
- Separate each of the corners at
the opening of the cradle. The fund
should not be Never at ground level,
but it must always remain a little
high.
- Lift the upper side until it is
horizontal. Fit the crossbars until you
hear the click of security.
- Check that the frame tubes are
firmly coupled trying download them
or fold them.
2
LOCK UNDERFRAME
- To lock the lower structure, press the center of
the crib.
- Check that the frame tubes are firmly coupled
trying download them or fold them.
Note: for proper installation of the cradle, you
must block part top of the structure rather than
the bottom.
3
INSTALLING THE PADDING BEDSPRING
(120 X 60 X 2 CM)
- Fold the mattress and place it in the bottom of
the cradle, with the printed side looking up.
- Adhesive tapes fastening padded mattress
should be introduced by the openings in the
background fabric and then fasten them to the
bottom to the mattress remains immobilized.
1
2
1
4
2
5
4
1
CUNA COM
3
2
4
3
6
5
CUNA C
7
9
EN
7
3
10
9
10
6