asalvo BOOP Bedienungsanleitung Seite 10

4
2
ELEVATOR INSTALLATION
- The lift must be attached to the cradle with the help of the zipper.
- When zipper all around put your hand in the hole to completely close from
the bottom.
- Enter the 4 tubes of metal in fabric loops it is at the bottom of the elevator.
Attach tubes 2 by 2.
- Surround tubes with straps adhesive is in the center controller high.
- The pillow-top mattress should be placed so that it is blocked by the straps
at the bottom corners.
4
EN
5
5
BENDING THE CRADLE
- Remove the mattress padding. Remove the height adjustment if necessary.
1
- Lift the bottom of the cradle pulling the center. Take this central part from
cradle to an intermediate height to the sides of the crib.
CUNA COMPLETA ELEFANTES
- To fold each of the upper side pipes, lift slightly and then press the lock
button located under the handle (see Figure 2) and fold the crossbar.
CUNA COMPLETA ELEFANTES
- Fold the crib and put the mattress around to keep it folded.
7
7
2
9
9
3
CUNA COMPLETA ELEFANTES
6
8
8
3
9
4
4
10
5
5
7
9
10
6
6
8
1
10
6