Silva ADC summit Benutzerhandbuch Seite 59

15.4.0 Data Log Mode -
Delete
the current
data
Delete
all Record
& Data
Data Log Mode Setting
Data Log Mode Setting
Logging
interval
setting
PC
Synchronization
Data Log Mode Setting
!
The following functions can be performed in
the Data Log Mode Setting.
1) Delete the current data
2) Set the logging interval for auto log
3) Enable the PC Synchronization
(transfer data from the ADC to PC)
4) Delete all data
!
Check the 'PC Synchronization' section
below for more detail on the communication
between the ADC and PC.