Inhaltsverzeichnis
Werbung
EnglIsH
12
Problem
During use,
the epilator
becomes hot
and suddenly
stops
operating.
Then the
speed lights
and the
charging light
flash red for
30 seconds.
The precision
epilator does
not work.
The precision
epilator is
operating,
but its
performance
is poor.
Possible
cause
The overheat
protection
has been
activated.
The
disposable
batteries are
empty or
have been
inserted
incorrectly.
After 40
minutes, the
disposable
batteries are
almost empty
and no longer
have enough
power to
guarantee
good
performance.
Solution
The epilator is equipped with
integrated overheat protection, which
prevents the epilator from becoming
too hot. If the overheat protection is
activated, the appliance switches off
automatically. Then the speed lights and
the charging light flash red for 30
seconds. To reset the overheat
protection, let the appliance cool down
and then switch it on again. To avoid
overheating of the epilator, do not
press the epilator too hard onto your
skin.
Replace the batteries or insert them
correctly (see the user manual).
Insert new batteries (see the user
manual). Only use disposable non-
rechargeable AA 1.5V alkaline
batteries.
Werbung
Inhaltsverzeichnis
