Using The Wine Refrigerator; Energy Saving Tips - Waeco MyFridge MF-6W Bedienungsanleitung

_MF-6W.book Seite 14 Montag, 3. September 2007 4:10 16

Using the wine refrigerator

The wine refrigerator has the following buttons:
No. in 1,
Description
page 3
1 POWER
2 LIGHT
3 TEMP –
4 TEMP +
Note
You can switch the temperature display between Celsius and
Fahrenheit. To do this, press the TEMP + and TEMP - buttons
simultaneously for three seconds.
6 Using the wine refrigerator
Before you switch on your new wine refrigerator for the first time,
you should clean it inside and outside with a damp cloth for
hygienic reasons (please also refer to the the "Cleaning and
maintenance" chapter on page 16).
6.1

Energy saving tips

Select a well-ventilated location for the device.
Do not open the wine refrigerator more often than necessary.
Do not leave the door open for longer than necessary.
6.2 Connecting the wine refrigerator
Danger of fatal injuries!
Never handle plugs and switches if you have wet hands.
➤ Before you start up the device for the first time, verify that the operating
voltage matches the mains voltage (see type plate).
➤ Connect the device as follows:
– With the mains adapter supplied to the 100-240 V AC mains
– With the 12 V lead supplied to a 12 V socket
14
Explanation
Switches the wine refrigerator on or off.
Switches the interior light on or off.
Decreases the desired cooling temperature
by 1 °C (2 °F).
Increases the desired cooling temperature
by 1 °C (2 °F).
MF-6W