Operation - Beurer HT 53 Gebrauchsanweisung

6. Operation

Warning
• Position yourself on a dry, non-conductive surface. Risk of electric shock!
• Make sure that your hands are dry! Risk of electric shock!
• Your hair must be dry! Risk of electric shock!
• The device can become very hot. When the device is hot, it must only be held using the handle [4] – risk of burns and fire!
• Never touch the conical heating rod [2]. Risk of burns!
• Switch the device off immediately if it is faulty or not working properly.
• Place the curling tongs with the stand [9] on a stable, level and non-flammable surface or hold the curling tongs in your
hand. Risk of fire!
Important
• Untangle the mains cable [7] if it is twisted.
• Do not pull, twist or bend the mains cable [7] and do not pull or route it over/on sharp, pointed objects or hot surfaces.
• Do not jam the mains cable [7] in drawers or doors, for example. Damaged or tangled mains cables increase the risk of
electric shock!
Starting the application/creating curls
1. Fully dry your hair before using the curling tongs.
2. Hair should be clean and free from styling products.
3. Comb your hair with a large-toothed comb to get rid of any tangles.
4. Switch on the curling tongs by pressing the ON/OFF button [3]. The operating display [8] starts to flash and tells you that
the curling tongs are on.
21