Care Instructions - prowin WIN-I Gebrauchsanweisung

Cleaning key
The key is meant to loosen the screw of the separator, so you can
take it off along with the screw and clean it.

CARE INSTRUCTIONS

Please follow these instructions after every use:
1
1. First pull out the mains plug.
2. Empty the waste water out of the tank and clean it afterwards with
3. Clean the bottom of the engine head with a cleaning cloth (wet) and
2
4. Take off the screw and the separator (see page 24), clean it
CLICK
5. Don't close the cover fl aps, lift up the handle of the water tank and
6. Simply by pushing down the engine head the room cleaning system
WARNING:
Never put your room cleaning system down when it's fi lled with water or
in moist state.
a dry cleaning cloth.
dry it off .
thoroughly and put it back on. Make sure that the separator
locks correctly into the notch and affi x it with the nut.
bring it into drying position (Illus. 1). Like this the remaining residual
moisture can circulate with the external air and dry optimally.
is quickly ready for its next use. (Illus. 2).
GB
57