Inhaltsverzeichnis
Werbung
Hint
• If you want to display the timing of shooting on the screen during blackout-
free shooting, adjust the setting using MENU
[Shoot. Timing Disp.].
• To take advantage of the performance of the camera, we recommend that
you use a UHS-II memory card. When using a UHS-II memory card, insert it
into the memory card slot 1.
Note
• When shooting without the shutter sound, do so on your own responsibility,
with sufficient consideration to the privacy and portrait rights of the subject.
• Even if you set the camera to shoot without the shutter sound, it will not be
completely silent.
• Even if you set the camera to shoot without the shutter sound, the aperture
and focus will make sounds.
• If you set [Audio signals] to [Off], the camera will not beep when the subject
comes into focus or when the self-timer is in operation.
• During blackout-free shooting, the slower the shutter speed, the lower the
refresh rate of the screen. If you want the screen display to be smooth in order
to track the subject, set a shutter speed faster than 1/125 second.
• The electronic shutter operates differently when a Mount Adaptor is attached
to the camera.
Displaying the release timing (Shoot. Timing Disp.)
Sets the method for displaying the shutter release timing on the screen
during blackout-free shooting.
MENU
(Camera Settings 2) [Shoot. Timing Disp.]
desired setting.
On: Type 1/On: Type 2:
On: Type 3/On: Type 4:
Off:
Does not display the shutter release timing during blackout-free shooting.
[On: Type 1]/[On: Type 2] (Example)
Displays a frame around the focusing frame.
Displays in the four corners of the screen.
(Camera Settings 2)
[On: Type 3]/[On: Type 4]
GB
GB
47
Werbung
Inhaltsverzeichnis
