Safety Precautions - PALSON Lima Gebrauchsanleitung

GB
Our products are designed to meet the highest standards of quality, functionality and
design. We hope you enjoy your new PALSON LIMA blender.

SAFETY PRECAUTIONS:

- Read all the instructions before using the appliance. Keep these instructions for
future reference.
- Misuse or improper handling may cause problems in the appliance and cause
injury to the user.
- The unit shall only be used for the purpose for which it has been designed.
No liability shall be accepted for damages arising from misuse or improper
handling.
- Before plugging in the appliance to the mains, check whether the supply and
voltage corresponds to those indicated on the bottom of the appliance.
- Do not put the appliance or the power plug in water or any other liquids. In the
event of the appliance falling in water, disconnect immediately from the mains
supply and take it to an authorised service agent for repair before reusing. Electric
shock hazard exists.
- Do not attempt to open the blender motor casing. Do not insert any type of object
in the blender motor casing.
- Do not use the appliance with wet hands, on a wet floor or in a damp
environment.
- Do not hold the power plug with wet or damp hands.
- Regularly check whether the power plug or adaptor is damaged. If damaged,
contact the manufacturer or an authorised service agent to have the power cord
and the plug replaced in order to prevent hazards.
- Do not use the appliance, if the power cord or the plug is damaged or if the unit
falls on the floor or if it has been damaged in any other way. In such cases, return
the unit to the technical service centre to be checked and repaired if necessary.
- Do not attempt to repair the appliance yourself. Electric shock hazard exists.
- Do not leave the power cord hanging from sharp edges and keep away from hot
objects and flames.
- Installation of a voltage surge suppressor will provide additional protection with
a nominal operating current of not more than 30 mega amps in the household
electricity supply. Consult your electrician.
- The power cord along with any other necessary extension cord will be placed so
as not to cause a risk to anyone who might accidentally pull on it or disconnect
the plug.
- If using an extension cord, it must be compatible with the electrical supply where
the appliance is being used. If not it will cause overheating of the cord and/or the
plug.
- Place the unit on firm, level, heat resistant surface, keeping it away from open
flames (like a gas oven) and keep out of the reach of children.
- This appliance is not suitable for commercial use or for outdoor use.
- Unplug the appliance when not in use and also unplug before cleaning.
- Caution: the appliance is in stand-by mode while it remains connected to the
mains supply. Keep out of reach of children or persons requiring supervision.
- Switch off the unit before disconnecting the power plug.
- Use only the manufacturer's spare parts.
12
- Never move the unit pulling it by the power cord.
- Do not remove individual components from the blender motor casing.
- If the power cord is damaged, it must be replaced by the manufacturer or an
authorised service agent or by a qualified technician, to prevent hazards.
- Unless supervised by an adult, children or other persons whose physical, sensory
or mental condition prevents them from using the appliance safely are not
permitted to use this product. Children should be supervised to ensure they do
not play with said product.
- Always use the blender with the lid securely in place.
ASSEMBLY AND USE
1. Clean the measuring cap, the lid and the glass jug before using for the first time.
2. Make sure the unit is switched off and do not plug in before assembling.
3. First fix the blades and the rubber seal on to the jug base and fit the base on to
the jug.
. Then fix the jug on to the motor base and make sure it is securely fixed to the base.
5. Fill the glass jug with the food you wish to blend and make sure the jug does not
overflow with liquid. The maximum capacity of liquid should not exceed 1500 ml.
6. Never use the unit without putting food in the jug.
7. Place the lid securely on the glass jar.
8. Insert the measuring cap in the opening in the lid and turn counter-clockwise to lock
in position.
HOW TO OPERATE THE BLENDER
1. Make sure the speed selector is turned to the "OFF" position and then plug the
blender in to the mains supply.
2. This unit is equipped with a safety device and the blender does not operate if the
jug is not fixed securely to the motor base.
3. Place the food you wish to blend in the glass jug.
. Place the lid on the glass jug and close tightly. Insert the measuring jug in the
hole in the lid and carefully turn counter-clockwise to lock in position.
5. Fix the glass jug on to the motor base. The blue light around the speed selector
indicates that the appliance is connected to the mains supply. The blender may
now be used as normal.
6. If you are using the grinder, place the coffee beans in the glass jar. The quantity
of coffee beans must be less than 60% of the total capacity of the grinding jar.
Place the grinder blade assembly and the rubber seal on the grinder base and
firmly fix to the glass jar. Fix the grinder on to the top of the motor base. Coffee
beans may now be ground as normal.
7. To use the "BATIDO / SMOOTHIE", "HIELO / ICE" or "TURBO" functions turn the
selector switch to the "ON" position and press one of the buttons. The button will
light up indicating that the function is operating.
8. To select the speed, turn the selector switch between the "MIN" (low power speed)
and "MAX" (high power speed) positions in order to achieve the required speed.
9. Use the appliance for a maximum of 2.5 minutes continuously and wait for 3
minutes before using again.
13