Inhaltsverzeichnis
Werbung
BEFORE FIRST USE
1. Before using your appliance, remove all packing material, plastic, labels, stickers or tags that may be
attached to the motor base, bowls or attachments.
Warning! Never immerse the housing, plug, or cord in water or any other fluid.
Caution! Switch off the appliance and disconnect from supply before changing accessories or
approaching parts that move in use.
2. Wash all parts, except for the motor base, in warm soapy water. Dry each part thoroughly before use.
If using the dishwasher, place parts only on the top rack of your dishwasher.
All parts, except for potato masher foot, whisk adapter and chopper upper part, can be washed on
the top rack of your dishwasher.
3. The housing should only be cleaned with a soft damp cloth, then dried with a cloth.
Note: Do not use abrasive cleansers or scouring pads to clean the surfaces of your appliance.
GETTING STARTED
4. Insert the mixing foot to handheld part, turn clockwise (A) and lock into position. To remove, turn
mixing foot counter clockwise (B).
5. Select the speed by moving the sliding speed selector (A). Press power button (B) to start mixing. Press
Turbo button (C) for the highest speed. LED light will indicate the mixing speed. Appliance can be used
continuously for 60 seconds. Afterwards, allow to cool for 1 minute.
6. Insert the stick mixer deep into the beaker, begin mixing by starting at normal speed. Make sure the
beaker is no more than 2/3 (600 ml) full. If you do not use the beaker, do not immerse the mixing foot
more than 2/3 of its length. Move stick mixer lightly up and down to ensure best processing of content.
Release switch to stop.
7. Using the mini chopper*. Place chopper bowl on a clean, level surface. Put stainless steel blade into
place.
8. Place food into the chopper bowl*. Amount of food to be chopped cannot exceed 300 g ( Indicated
max level). Close the lid.
9. Insert handheld part into the chopper lid, turn clockwise (A) and lock into position. Plug into power
outlet and press switch to start. Release to stop. Remove handheld part by turning counter clockwise
(B).
10. Working with the traditional whisk*. To assemble whisk with handheld part, turn handheld part
clockwise until tightened. To disassemble, turn counter clockwise.
11. Using the potato masher*. To assemble potato masher with handheld part, turn handheld part
clockwise until tightened. To disassemble, turn counter clockwise.
Note: Potatoes are boiled and then smashed at maximum speed during 60 seconds.
CLEANING AND CARE
12. Switch the appliance off, remove the plug from the wall socket and wait until the tools have stopped
completely.
Warning! Never immerse the housing, plug, or cord in water or any other fluid.
13. Wash all parts, except for the motor base, in warm soapy water. Dry each part thoroughly before use.
If using the dishwasher, place parts only on the top rack of your dishwasher.
All parts, except for potato masher foot, whisk adapter and chopper upper part, can be washed on
the top rack of your dishwasher.
14. The housing should only be cleaned with a soft damp cloth, then dried with a cloth.
Note: Do not use abrasive cleansers or scouring pads to clean the surfaces of your appliance.
Before storage remove the plug from the power outlet. Ensure the appliance is clean and completely
dry.
www.electrolux.com
BG
CZ
DE
DK
EE
ES
FI
FR
GB
GR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RS
RU
SE
SI
SK
TR
UA
37
Werbung
Inhaltsverzeichnis
Fehlerbehebung
