Virax 262070 Bedienungsanleitung Seite 10

VIRAX tools are precision manufactured and are designed for professional users. These highly reliable tools
provide excellent results when used correctly and carefully. As for all electric tools, you must respect the
manufacturer's instructions for the best results. Please read this "User manual" document before using the
appliance to understand how it operates and learn all the safety warnings and instructions. Consult your VIRAX
representative or distributor if you have any questions about the tool or its operation.
France customer services: +33 (0)3.26.59.56.78 - International customer services: +33 (0)3.26.59.56.97
VIRAX has over 20 years' experience in designing and manufacturing electro-hydraulic and electro-mechanical
sanitary crimping tools. Samples are regularly taken from production and are tested under extreme conditions.
Each tool is tested individually during manufacture to check that it is operating correctly.
1- Unpacking
Thanks to modern manufacturing techniques, it is highly unlikely that your tool will be defective or a part will be
missing. If, however, you do find a problem, do not use the tool before the parts are replaced or the fault is
corrected. Failure to respect this rule may cause serious injury.
2- Introduction
Your new tool has been designed and produced according to quality standards to meet the highest
requirements. It is easy and safe to use. Using your tool correctly will guarantee that it will last a long time.
Warning!
Read this manual carefully before using your new tool. Pay attention to the "Warning" sections. Your
electrical tool has characteristics that will make your work easier. This instrument has been designed
and produced according to all safety requirements to ensure that it is easy to use and maintain.
Do not throw portable tools out with domestic rubbish!
Waste from portable tools must not be discarded with household waste. There are specialist sites for
collecting and recycling portable tools.
RESPECT FOR THE ENVIRONMENT
In order to protect the environment, the appliances, their accessories and their packaging must be able to be
recycled appropriately. Our plastic parts have been marked to enable selective recycling.
3- General safety warnings for the tool
WARNING:
▪ Read all the safety warnings and all the instructions. Failure to follow the warnings and
instructions may lead to an electric shock, a fire and/or a serious injury.
▪ Keep all the warnings and instructions to be able to refer to them later.
▪ The term "tool" in the warnings refers to your portable tool supplied by the mains with
power cable.
3.1. Working zone safety
▪ KEEP THE WORKING ZONE CLEAN AND WELL LIT. Poorly lit or untidy zones are sources of accidents.
▪ DO NOT OPERATE ELECTRIC TOOLS IN EXPLOSIVE ATMOSPHERES (FLAMMABLE LIQUIDS, GAS OR
DUST). Electric tools create sparks which may cause dust or smoke to catch fire.
▪ KEEP CHILDREN AND ANY PEOPLE PRESENT AWAY FROM THE WORKING ZONE. Distractions may
cause you to lose control of the tool.
3.2. Electrical safety
VIRAX - 39 quai de Marne 51206 EPERNAY Cedex
EN