Troubleshooting - TFA SPIRA Bedienungsanleitung

TFA_No. 30.3064_Anleitung 23.10.2017
SPIRA – Wireless thermometer
• The transmitter can be wall mounted (mounting hole at the back). When placed outdoors, choose a shady and dry place for
the transmitter. Direct sunlight may trigger incorrect measurement and continuous humidity damages the electronic com-
ponents needlessly.
• Once the desired location is chosen, check whether the transmission from the transmitter to the base station is possible
(transmission range of up to 100m in open areas). Within solid walls, especially ones with metal parts, the transmission
range can be reduced considerably.
• If necessary choose another position for the transmitter and/or base station.
12. Care and maintenance
• Clean the devices with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the batteries if you do not use the devices for a long period of time.
• Store the devices in a dry place.
12.1 Battery replacement
• Change the batteries of the outdoor transmitter, when the battery symbol appears on the display of the outdoor tempera-
ture.
• Change the base station batteries, when the battery symbol appears on the display of the indoor temperature.
• Please note: When the batteries are changed, the contact between the outdoor transmitter and the base station must be
restored – so always restart both devices or start a manual transmitter search.

13. Troubleshooting

Problem Solution
➜ Operation with power adapter:
No indication
➜ Connect the base station to the power adapter
on the base station
➜ Press the LICHT button to activate the backlight
➜ Check the power adapter
Battery operation
➜ Ensure the batteries' polarity are correct
➜ Press any button to activate the backlight briefly
➜ Change the batteries
➜ No outdoor transmitter is installed
No transmitter reception
➜ Check the outdoor transmitter's batteries (do not use rechargeable batteries!)
Display "- -"
➜ Manual search for the transmitter (according to the manual)
➜ Restart the outdoor transmitter and the base station according to the manual
➜ Choose another place for the outdoor transmitter and/or the base station
20
15:34 Uhr Seite 11
SPIRA – Wireless thermometer
➜ Reduce the distance between the outdoor transmitter and the base station
➜ Check if there is any source of interference.
➜ Battery operation: Change the batteries
Incorrect indication
14. Waste disposal
This product has been manufactured using high-grade materials and components which can be recycled and reused.
Never dispose of empty batteries and rechargeable batteries with ordinary household waste.
As a consumer, you are required by law to take them to your retail store or to an appropriate collection site
depending on national or local regulations in order to protect the environment.
The symbols for the contained heavy metals are:
Cd = cadmium, Hg = mercury, Pb = lead
This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive (WEEE).
Please do not dispose of this product in ordinary household waste. As a consumer, you are required to take end-
of-life devices to a designated collection point for the disposal of electrical and electronic equipment, in order to
ensure environmentally-compatible disposal.
15. Specifications
Base station
Measuring range
Indoor temperature 0 °C... +50 °C /32 °F...122 °F
Power consumption 2 x 1,5 V AA (batteries not included)
Power adapter 230 V AC / 5.0 V DC (included)
Housing dimension 83 x 55 x 152 mm
Weight 161 g (device only)
Outdoor transmitter
Measuring range
Outdoor temperature -40 °C... +60 °C (-40 °F...140 °F)
Range max. 100 m (open field)
Transmission frequency 433 MHz
21