AWT TSL-Serie Montage- Und Bedienungsanweisung Seite 39

9. Heater
9.1 The heater can only be used while the massage function is running.
9.2 Touch to activate the heater function.
Touching the button will shut the heater off.
The default temperature is set to 37°C
The automatic heating: if the water temperature ≥ the set water temperature
+1° C, the heater stops. If the water temperature ≤ the set temperature -1 ° C, the heater.
The icon is displayed dynamically.
9.3 Touch and the display shows the temperature value.
Use the navigation buttons to set the temperature.
The temperatue is changed in steps of 1°C. If you hold the button the temperature will
change by 1°C every 0,5 seconds. After 5 seconds of inactivity the display will exit the
setting and show the current water temperature.
9.4 Temperature setting range:30°C--45°C.
9.5 Touch again to turn off the heater.
10. Ozone
10.1 Use the navigations buttons till the cursor is on
10.2 The ozone will be turned off automatically after 10 minutes.
Controlpanel
and touch it to start the ozone.
35