Other Functions; Important User Information; Technical Data - 3M Peltor WS Serie Handbuch

The menu has the following options:
Automatic power off
• Off (Automatic power off feature is disabled)
• 2 hours (Automatic power off after 2 hours)
• 8 hours (Automatic power off after 8 hours)
Battery type
In this settings you specify the used battery type
• Alkaline
• Rechargeble
Reset to factory default
A reset to factory default is achieved by pressing and holding the Bluetooth button (A:2) for 2 sec.
in this menu stage. This resets the device to factory default, and removes all paired devices.
A reset to factory default can also be achieved without having to enter the menu. This is done by
pressing booth buttons for 10 sec until the adapter switches off again.

3. OTHER FUNCTIONS

• The last settings are stored when the adapter is switched off.
• Low battery level is indicated by a ghost voice message: "adapter low battery" and On/Off/
Mode button (A:1) flashes red.
• Digital noise reduction and echo cancellation on incoming audio.
• Aircraft detection with notification to Pilot and Peltor Headset.

4. IMPORTANT USER INFORMATION

• Certain chemical substances may damage the adapter. Contact the manufacturer for more
information.
• If sound distortion increases or the volume becomes too weak, it is time to charge or replace
the batteries. Never replace or insert batteries with the unit switched on. Ensure that the
batteries are correctly aligned before using the product.
• Do not store the adapter with batteries inserted.
• Under extremely cold conditions, warm the adapter before using.
• The performance may deteriorate with battery usage.
• Operating temperature: -20°C to +55°C

5. TECHNICAL DATA

5:1 Battery type
All types of AA 1.2–1.5V batteries can be used (NiMH, NiCd, Alkaline, Lithium, Manganese, etc).
GB
7