3M Peltor WS Serie Handbuch Seite 6

GB
WS5 Adapter
The WS5 adapter is in conformity with the provisions set out in the R&TTE directive 1999/5/EC.
Thereby it fulfills the requirements for CE marking.
1. WHAT IS WHAT
(A:1) On/Off/Mode
(A:2) Bluetooth button
(A:3) Attachment eye
(A:4) Attachment Clip
2. USAGE/FUNCTIONS
2:1 Turning the adapter On or Off
Press and hold the On/Off/Mode button (A:1) for two seconds to turn the adapter On or Off.
2:2 Bluetooth
The adapter can be paired with and connected to a Bluetooth device that supports Handsfree or
Headset.
PTT functionality over the Bluetooth protocol is compatible with Peltor WS2, WS3 and WS5
headsets.
Pairing procedure
• Put the headset you want to connect to in pairing mode according to headset user instructions.
• Ensure that the adapter is charged and turned off.
• Press and hold the On/Off/Mode button (A:1) for five seconds. This puts the adapter in pairing
mode, the On/Off/Mode button (A:1) button starts flashing rapidly.
• The adapter starts looking for Peltor headsets and connects to the first Peltor headset found. If
no Peltor Headset is found within 30 sec, the adapter starts looking for other headsets.
• When pairing is complete and the headset is connected the On/Off/Mode button (A:1) flashes
twice every 3 sec.
2:3 User menu
The user menu is entered by pressing the On/Off/Mode button (A:1) when device is powered on
and connected to a headset. Menu commands will be sent from the adapter over the Bluetooth
protocol and can be heard as a ghost voice in a connected headset.
6