1
Switch off the circuit breaker
of the installation site.
4
Slide the IR unit 2 into the ceil-
ing bracket as shown.
7
Reinstall the fan cover by at-
taching it to the ceiling bracket
and reinstall the screws re-
moved in step 2.
2
Remove the four screws on the
fan cover.
5
Install the IR receiver 4 of the
IR unit 2 at its opening on the
cover. Alternatively install, the
IR receiver 4 directly to the
ceiling with its double sided
tape.
8
Switch on the circuit breaker
of the installation site.
ENGLISH
3
Lower the fan cover and uplug
the cable clip from the ceiling
bracket to the fan unit.
6
Connect the ceiling bracket
input 1 and fan output 5 clips
with the corresponding clips
on the ceiling bracket and fan
unit.
GB
53