Machine Description - Nilfisk-Advance SR 1800C B-D Betriebsanleitung

USER MANUAL
SR 1800C B
(See Fig. F)
1. Fan
2. Side broom
3. Hydraulic system oil tank
4. Steering wheel
5. Drive hydraulic motor
6. Rear wheel
7. Frame
8. Motor
9. Drive hydraulic pump
10. Main broom hydraulic motor
11. Main broom
12. Accessory hydraulic pump
13. Dust suction filter
14. Hopper
15. Front wheels
16. Side broom hydraulic motor
17. Battery
18. Fan motor

MACHINE DESCRIPTION

Description of the machine without roof
(See Fig. G)
1. Seat
2. Steering wheel
3. Frame
4. Bumpers
5. Hopper hood
6. Hopper
7. Right side lid
8. Left side lid
9. Engine hood
10. Left side hood
11. Right side hood
12. Rear hood
13. Pedal
14. Accelerator lever
15. Control levers
16. Side broom
17. Main broom
18. Brake pedal
19. Seat supporting hood
20. Dashboard
6
Description of the machine with roof
(See Fig. H)
1. Seat
2. Steering wheel
3. Frame
4. Bumpers
5. Hopper hood
6. Hopper
7. Right side lid
8. Left side lid
9. Engine hood
10. Flashing light
11. Left side hood
12. Rear hood
13. Mirror
14. Cab
15. Side broom
16. Main broom
Frame
Rigid, composite supporting frame on rectangular plan,
consisting of electrically welded steel plates.
The mechanical components of the machine are suitably
sized, according to a 1.4÷1.5 factor, to withstand the dynamic
stress due to the machine operation (supporting frame, hubs,
axles, hopper supporting and lifting system, etc.).
Hopper
The hopper is fitted on the front side of the machine and
connected to the frame by means of a hinge.
A hydraulic cylinder lifts and overturns the hopper when the
waste is to be dumped at a height. The lower part has a
hinged skirt, operated by a hydraulic cylinder, which closes
the hopper while the waste is being dumped. The front side
has two fans operated by a motor. These fans create a
vacuum inside the hopper and in the main broom
compartment. Inside it, there is a polyester closed pocket filter
connected to an electric filter shaker.
On the front right side there is a side broom whose rotation is
operated by a hydraulic motor, while its lifting and lowering
are operated by a hydraulic cylinder.
It is possible to install a side broom on the left side as well and
a third broom for corner cleaning.
Main broom
It consists of a sweeping roller whose rotation is operated by
a hydraulic motor and whose lifting and lowering are operated
by a hydraulic cylinder. It is automatically adjusted by the
self-levelling device.
33014817(2)2006-06 A