Axis F41 Installationshandbuch Seite 16

AXIS F41 Main Unit
Connectors
I/O Connector
6–pin terminal block for:
• Auxiliary power
• Digital Input
• Digital Output
• 0 V DC (-)
Func-
tion
0 V DC (-) 1
DC
output
Config-
urable
(Input or
Output)
(DC output)
P- Notes
i-
n
2
Can be used to power auxiliary
equipment.
Note: This pin can only be used
as power out.
3
Digital input – Connect to pin
–
1 to activate, or leave floating
6
(unconnected) to deactivate.
Digital output – Connected
to pin 1 when activated,
floating (unconnected) when
deactivated. If used with an
inductive load, e.g. a relay,
a diode must be connected
in parallel with the load, for
protection against voltage
transients.
1 2 3 4 5 6
16
Specifications
0 V DC
12 V DC
Max load = 50 mA
0 to max 30 V DC
0 to max 30 V DC,
open drain,
100 mA