Product Data - HEIDENHAIN QUADRA-CHEK 2000 Installationsanleitung

6 Specifications
6.1 Overview
This chapter contains an overview of the product data
and drawings with the product dimensions and mating
dimensions.
6.2

Product data

Device
Housing Aluminum milled front + cast rear
panel
Housing 200 mm x 169 mm x 41 mm
dimensions
Fastener system, Mounting hole pattern
mating dimen- 50 mm x 50 mm
sions
Display
Visual display unit LCD Widescreen (15:9)
color screen 17 .8 cm (7")
800 x 480 pixels
Display step Selectable, min. 0.00001 mm
User interface User interface (GUI) with touch-
screen
Electrical data
Supply voltage AC 100 V ... 240 V (±10 %)
50 Hz ... 60 Hz (±5 %)
Input power max. 38 W
Buffer battery Lithium battery type CR2032; 3.0 V
Overvoltage II
category
Number of 2 (1 additional input can be
encoder inputs enabled via software option)
11 μA: max. current 300 mA,
Encoder interfaces
max. input frequency 150 kHz
1 V
max. input frequency 400 kHz
TTL: max. current 300 mA,
max. input frequency 5 MHz
Interpolation at 4096-fold
1 V
PP
Touch probe Voltage supply DC 5 V or DC
connection 12 V
5 V or floating switching output
4 digital inputs
1 digital output
Max. cable length with
HEIDENHAIN cable 30 m
Connection for 2 F-SMA sockets (screw thread
optical edge designation 1/4-36 UNS-2A)
detector
Digital inputs TTL DC 0 V ... +5 V
28
: max. current 300 mA,
PP
Electrical data
Digital outputs TTL DC 0 V ... +5 V
Maximum load 1 kΩ
Data interface 1 USB 2.0 Hi-Speed (Type A),
maximum current 500 mA per
USB connection
1 Ethernet 10/100 Mbit/1 Gbit
(RJ45)
Environment
Operating 0 °C ... +45 °C
temperature
Storage –20 °C ... +70 °C
temperature
Relative air 10 % ... 80 % RH, non-condensing
humidity
≤ 2000 m
Altitude
General information
Directives EMC Directive 2014/30/EU
Low Voltage Directive 2014/35/EU
RoHS Directive 2011/65/EU
Pollution degree 2
Protection Front panel and side panels: IP 65
EN 60529
Rear panel: IP 40
Mass 1.3 kg
With Duo-Pos stand 1.45 kg
With Multi-Pos stand: 1.95 kg
With Multi-Pos holder: 1.65 kg
6.3 Product dimensions and mating
dimensions
Further information: Page 175 and the following
pages.
All dimensions in the drawings are in millimeters.
HEIDENHAIN | QUADRA-CHEK 2000 | Installationsanleitung | 06/2018