Facom CD.12A Original Bedienungsanleitung Seite 11

SAFETY MESSAGE
Before operating the torque bench, please read this manual completely, and keep it nearby for future reference.
Please follow all safety massage in this manual for safe operation, and read it completely to prevent from injury to the
operator or causing breakage to the Equipment.
Safety Information
• Flying particles can discharge when apply torque.
• Users and bystander must wear safety goggles.
• Always wear safety goggles when applying torque.
Risk of entanglement:
• Before start power tools, check for obstacles near your hand and anticipate the reaction force by gripping tool fi rmly.
• Do not wear loose clothing and jewelry while operating power tool, loose clothes and jewelry can be caught in
moving parts.
• KEEP your body away from rotating parts.
• Wear a protective hair covering to contain long hair and prevent contact with moving parts.
Improper use can cause breakage:
• Read instructions before operating.
• Follow manufacturer's instructions safety precautions and specifi cations when operating tools.
• Make sure all components, including adaptors, extension drivers, and socket are rated to match or exceed the
torque or load being applied.
• Do not use chipped, cracked or damaged sockets and accessories.
• While using ratchets make sure the direction is fully engaged in the correct position.
1. DESCRIPTION
1. Sensor rotating plate
2. Aluminium beam
3. Fixing bar
4. Fixing bar 2
5. Handle plate
6. Base of fi xing bar
NU-CD.12A_0817.indd 11
7. Base of slider
8. Clamp lever
9. Set collars lever
10. Hand wheel
11. Gear Box
12. Sticker
13. Cover of bench
11
07/08/2017 10:02:23