USRobotics USR5463 Installationsanleitung Seite 10

English
Windows XP, 2000, and NT Users:
Click Windows Start > Run.
1.
2. Type cmd and click OK.
3. At the DOS prompt, type ipconfig /all and press Enter.
4. Check the IP Address, Subnet Mask, Default Gateway, and DNS
server data to make sure they are correct. If the information is not
correct:
A. Type ipconfig /release and press Enter.
B. Type ipconfig /renew and press Enter.
Solution 4:
You need to verify the connection setting of your Web browser and that the
HTTP Proxy feature of your Web browser is disabled. You need to do this so
that your Web browser can read the configuration pages inside your router.
Launch your Web browser:
Internet Explorer users:
Click Tools > Internet Options, and select the Connections tab.
1.
2. Select Never dial a connection, then click Apply.
3. Click OK.
4. Click Tools > Internet Options.
5. Click the Connections tab, and click the LAN Settings button.
6. Clear all the check boxes and click OK.
7. Click OK.
Netscape Navigator 8.x users:
Click Tools > Options > General.
1.
2. Click the Connection Settings button.
3. Select Direct connection to the Internet, and then click OK.
I can't access the Internet.
Solution 1:
Make sure the power cord and all the Ethernet cables are connected cor-
rectly. This includes the cables connecting the router, the modem, and all
the computers in the network.
Solution 2:
Reboot the router by unplugging and plugging in the power supply.
I do not know whether my IP address is static or dynamic.
Solution:
Verify with your Internet Service Provider whether you have a dynamic or
static IP address.
6