Vooni Triple Bedienungsanleitung Seite 4

EN
INSTALLATION IN CAR
1. Unscrew the locking mechanism from the back of the
Wireless Charger and place it over the knob on the Car
Bracket instead (with the widest side up).
2. Position the Car Bracket's knob in the hole on the wire-
less Charger and push them together until fixated. Attach
the locking mechanism again to lock the charger to the
bracket.
3. To prevent the bracket from sliding on the rough surface
of the dashboard, use the Self-adhesive Holder. Install
the holder on the horizontal dashboard by removing the
protecting cover and press the holder so it sticks to the
dashboard. Make sure the adhesive sticker fit tight onto
the dashboard.
4. Place the Car Bracket in the holder and push the lever
down to fixate the suction cup.