NSK Ti-Max M40B-LED Handbuch Seite 3

· Do not sterilize a high temperature including the Autoclave sterilization.
· Perform periodical maintenance checks.
· If the motor has not been used for a long period, check for noise, rotation, and overheating before use.
( 1 ) Connecting
1 ) Align the motor and the pipe hole of the motor cord.
2 ) Insert the Motor.
3 ) Fasten the Motor Cord Nut securely.
(2) Disconnecting
Unscrew and detach the Motor Cord Nut, and pull out the Motor
Cord Connector.
Remove Motor Cord Adapter before connecting.
( 1 ) Connecting
1 ) Insert the E-type handpiece in the Motor Insert.
2 ) Turn the handpiece until it clicks. ( Positioning mark is aligned. )