NSK Ti-Max M40B-LED Handbuch Seite 2

Intended to use
This motor is designed only for dental clinic use by qualified personnel.
· When operating the motor always consider the safety of the patient.
· Do not allow any impact and do not drop the motor.
· Check the vibration, noise and overheating before use and should the motor function abnormally, stop using
immediately and contact dealer for repair.
· Refer to the motor cord manual for connecting it to the motor.
· Do not connect / disconnect the attachment until the drive motor has completely stopped.
· Do not exceed the speed recommended by the handpiece manufacture.
· Do not lubricate the motor.
· Do not wipe with, or clean or immerse in, high acid water or sterilizing solutions.