Igloo LUZON Bedienungsanleitung Seite 24

(For LT LED lighting) With the one-way lamp power supply, make sure that the power cord is attached to the
adequate side of the lamp. The power supply connecting point is marked with a nameplate.
Below is a sample nameplate. Particular attention should be paid to the last two positions in the code:
type of power supply and voltage.
Door seal should be cleaned solely with clean water without any cleansing agents and it should be
thoroughly dried. The seal cannot get into contact with oily substances or grease!
Control whether door close properly during maintenance procedures.
Test: place a sheet of paper between the seal and the casing and close the door. The paper
should pose a tangible resistance during an attempt to pull it out.
Elements of device can corrode when improper used and maintenance. To avoid that please
follow the rules:
• Do not allow contact of the surface of the device with substances containing chlorine and / or baking
soda in different varieties, which destroy the protective layer and components of the device (also
includes various stainless steel)
During maintenance services it is necessary to pay attention not to damage the data place of the device
Fig.11 (p.25), which contains significant information for servicing organs and waste removal companies.
www.igloo.pl User manual Luzon, Luzon Deep
en
23