Fm Mode - auna DR-160 BT Handbuch

DAB Information
• Bit rate: shows the date rate at which the signal is being transmitted.
• Bit Error Rate (BER): provides details of the signal error rate.
• Channel and Frequency: Displays the station's transmission channel
number and frequency.
• PTY (Program Type): shows the type and description of the program
provided by the DAB station.
• Time and Date: Displays the time and date information provided by the
broadcaster.
• DAB Indication: Indicates DAB mode.
• Dynamic Label Segment (DLS): Displays scrolling text information
supplied by the broadcaster.
How to store a preset station
Up to 10 preset stations can be set. To store a station that you are currently
playing:
• Press and hold "preset" button, 01.[EMPTY] will show on screen.
• Press "prev" or "next" button to change the "1" to the number you want
to store the station as. Then press "volume/ok" button to save.
How to recall a preset station
Press the "preset" button, then press "prev" or "next" buttons to scroll
through your preset stations. Press "enter" button to select your choice.

FM MODE

• Press the "Standby/Mode" button to select FM radio. Then press
volume/ok button to confirm.
• The first time you do this FM frequency "87.5MHZ" will be displayed on
the screen.
• Fully extended the antenna
• To auto scan, press "scan" button. This will start scanning up the
frequency band and play the first station it find with good signal.
• To scan down the frequency band press and hold "scan" button for a
few seconds.
EN
17