Package Contents - CMT ORANGE TOOLS CMT3000 Gebrauchsanweisungen

Utensili necessari CONTENTS Utensili necessari
DESCRIPTION
The CMT3000 jig is designed for easily and rapidly cutting round or elliptic boards and extensions. It
widens the portable router's application possibilities and increases the quality of the end product as
far as finish and precision are concerned. The basis of the whole jig system is a sliding cross frame
made of special highly resistant plastic with slots along which slider pins run.

PACKAGE CONTENTS

1
Cross frame in special PVC - (1 pc)
2
Slider pin with 16mm bore - (2 pcs)
3
Connector plate - (1 pc)
4
Threaded extension rod L =400mm - (1 pc)
Threaded extension rod L =400mm
5
with screw/pin - (2 pcs)
Guide rods for router base D=10mm (8
6
mm on request) L= 400mm - (2 pcs)
7 M8 Control bolt for slider pin - (2 pcs)
8
M8x20 inbus screw (1 pc)
Split washer 8.4x16x1.6mm for M8
9
screw - (1 pc)
Split washer for M8 screw - (1 pc)
10
Screw washer for M5 screw - (2 pcs)
11
Inbus screw M5x16 UNI-5931 - (2 pcs)
12
Self-tapping countersink flat head
13
wood screw 4x35
Countersink flat head wood screw
14
M4x25
- (2 pcs)
1 1
- (4 pcs)
8
12 11
13
14
4
5
6
9
10
6
1
www.cmtutensili.com www.cmtutensili.com www.cmtutensili.com
3
7
2