Using The Vacuum Cleaner - Dometic CV1004 Montage- Und Bedienungsanleitung

Using the vacuum cleaner

8 Using the vacuum cleaner
A
NOTICE!
•
Do not use the vacuum cleaner without a dust bag or motor fil-
ter.
•
Only use spare parts and accessories recommended by the
manufacturer.
8.1 Vacuuming using the central vacuum cleaner
➤ Open the sliding cover (fig. 2 2, page 3) by sliding it to the right.
➤ Insert the hose into the hose connection on the device.
➤ Set the switch to position "I" (fig. 2 1, page 3) to switch on the device.
✓ The vacuum cleaner switches on.
➤ Set the switch to position "O" (fig. 2 1, page 3) to switch off the device.
➤ Disconnect the hose from the hose connection on the device.
➤ Close the sliding cover (fig. 2 2, page 3) by sliding it to the left.
8.2 Vacuuming using the hose socket
I
NOTE
Use the sliding cover to close up the hose connection on the front of
the device if you are vacuuming from the external hose socket. This
increases the level of suction.
➤ To switch on, connect the hose to the external hose socket.
✓ The vacuum cleaner switches on automatically.
➤ To switch off, disconnect the hose from the external hose socket.
✓ The vacuum cleaner switches off automatically.
14
CV1004
EN