Renkforce 1712587 Bedienungsanleitung Seite 4

Tips and useful information
a) USB 3.0
• Your computer must support the USB 3.0 standard in order to transfer data using USB 3.0
speeds.
• If you are connecting the product to a USB hub, the USB hub must support the USB 3.0
standard in order to provide the maximum transfer speed.
b) General
• Before turning the product off, eject the hard disk drive from your computer to avoid data loss.
Refer to the documentation from the operating system manufacturer.
• The product recognises when the computer is turned on/off and turns itself on/off accordingly.
When the computer is turned off or placed in hibernation mode, the inserted hard disk drive
turns itself off along with the LED indicator. On some operating systems, only the monitor
and connected peripheral devices are turned off when the computer is placed in hibernation
mode; the mainboard continues to be supplied with a current. If so, the inserted hard disk
drive and the LED indicator do not turn off.
• Note that files may be damaged and the operating system may crash if the connection cable
is disconnected when data is being transferred. Always unmount the hard disk drive via the
operating system before disconnecting the connection cable.
• Always handle hard disk drives carefully. Vibrations during use and even a few seconds after
the hard disk drive has turned off may make the read/write heads touch the magnetic disk,
which can destroy the hard disk drive.
• When connecting the hard disk drive for the first time, it may take a while for the hard disk
drive to be recognised. This time may vary depending on the operating system.
Care and cleaning
• Always disconnect the product from the power supply before cleaning it. Wait at least 30
seconds until the magnetic plates on the hard disk drive have come to a complete standstill.
• Do not immerse the product in water.
• A dry, lint-free cloth is sufficient for cleaning the exterior of the product. Do not press too hard
on the housing, as this can lead to scratch marks.
• Dust can be easily removed using a soft and clean long-haired brush.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions as these can
damage the housing or impair the product function.
Disposal
Electronic devices are recyclable waste and must not be placed in household
waste. At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to protection of the environment.
Technical data
Power supply ................................ 5 V/DC via USB 3.0, max. 2 A
USB standard ............................... USB-C™ 3.0 (compatible with USB2.0 and 1.1)
Supports ....................................... Up to Super-Speed (5 GBit/s)
Hard disk drive (SATA) ................. Size 6.35 cm (2.5") (Height <9.5 mm),
SATA III HDD/SSD
Connection adapter ...................... USB-C™ to SATA
Backwards compatible .................. SATA III and SATA II/I
Supported hard drives .................. Up to 3 TB
Supported operating systems ....... Windows
32-bit, 7 (32/64-bit), 8 & 8.1 (32/64-bit), 10 (32/64-bit), Mac
OS X 10.12.6, Linux Kernel 16.08, Android 4.0 to 8.0 (via
OTG), Windows Phone 10, Android 4.0 for Blackberry,
Symbian
Connection ................................... Supports UASP (USB Attached SCSI)
USB cable ..................................... Bidirectional
Cable length ................................. 45 cm (USB3.0 Type C to C cable)
45 cm (USB3.0 USB A to C cable)
Housing colour .............................. Transparent
Cable colour ................................. Black
Operating conditions ..................... -10 to +60 °C, 20–80 % relative humidity (non-condensing)
Storage conditions ........................ -20 to +80 °C, 10–90 % relative humidity (non-condensing)
Dimensions (W x H x D) ............... 79 x 13 x 131 mm
Weight .......................................... 53 g
2000, XP (Home, Pro, with SP1, SP2, SP3),
®
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical state at the time of printing.
Copyright 2018 by Conrad Electronic SE. *1712587_v2_1118_02_DS_m_4L_(1)