Herunterladen Inhalt Inhalt Diese Seite drucken

Bonding From An External Bluetooth Device; Debonding An External Mobile Device; Removing A Mobile Device From The Device List; Making Calls - Porsche Classic Gerätehandbuch

Vorschau ausblenden Andere Handbücher für Porsche Classic:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 6
Some mobile devices require the PCRN's
at the mobile device. In some instances,
this may have to be repeated, e.g. before
phonebook data are transferred. To avoid this
request, you can authorise the PCRN in the
device lists provided by many mobile devices.
Thereafter the device is bonded automatically
tion please refer to the operating instructions
of your mobile device.
The Bluetooth
®
module of the PCRN sup-
ports the bonding of up to 4 mobile devices
with up to 1250 phone book entries each.
Bonding from an external Bluetooth
device
If the PCRN does not identify your mobile device
or if bonding to the PCRN fails, you may also
start the authorisation procedure from your
mobile device.
1. If another mobile device is connected to the
PCRN, disable Bluetooth
®
at the bonded
mobile device in order to debond it from the
PCRN.
2. Press the PHONE key.
Please ensure that the Bluetooth
of the mobile device is enabled. Observe the
instructions stated above concerning the
enabling of Bluetooth
®
.
3. Use the mobile device to scan for audio ac-
cessories or devices that support Bluetooth
For further information please refer to the
manufacturer's operating instructions.
4.
displayed on the mobile device, select the
PCRN and, if requested, enter the pairing-
code (default: 1234) into the mobile device.
Successful log-in of the device is shown and
the device is bonded. For further details about
-
the general procedure please refer to the
manufacturer's operating instructions.

Debonding an external mobile device

To debond an external mobile device, proceed
as follows:
®
1. Press the PHONE key.
2. In tab PHONE or OPTION, tap button UN-
LINK.
Removing a mobile device from the
device list
To remove an already registered mobile device
from the device list, proceed as follows:
1. Press the PHONE key.
2. Select the mobile device from the list.
3. Tap button REMOVE, and then
®
Visibility

Making calls

®
.
in its front face (see information provided above
about general use and control elements). An
additional external microphone for installation in
the vehicle is included in the PCRN's supply. This
allows you to make calls without using a handset.
When a mobile device is bonded to the PCRN via
via the hands-free feature.
Calls can be switched back directly to the
mobile device by tapping PRIVATE.
Please remember that it is impermissible to
use the cell phone while driving in certain
countries and regions. Observe all applica-
ble laws and regulations concerning the use
of cell phones and all local restrictions.

Muting the hands-free microphone

During a call, the microphone can be muted
temporarily by tapping MUTE.
.
31
PHONE

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis