Inateck BCST-60 Bedienungsanleitung Seite 10

8 digits 9 digits
4.Scan "Exit with Save" Barcode to end the setting
Exit with Save
Note: Refer to the setting of "delete 0 digit character" if no character should be
deleted.
Inventory Mode
Users may use inventory mode to keep scanned barcodes in the buffer of Inateck
BCST-60, and upload them to computer in batches. Under inventory mode users are
not restricted to the time and location when upload data. Of course, history data can
be cleared in buffer. More details about inventory mode are as below.
1. Scan the barcode to enter Inventory Mode
Enter Inventory Mode
2. Scan the barcode to return to Common Mode
（*）Return to Common Mode
3. Scan the barcode to clear data in buffer (for Inventory Mode only).
Clear Data in Buffer(for Inventory Mode only)
4. Scan the barcode to upload data from buffer (for Inventory Mode only)
Data Upload (for Inventory Mode only)
8