Nowsonic AUTARK ID07 Bedienungsanleitung Seite 9

www.nowsonic.com
Outlets and controls on the rear panel
The following outlets and controls are available on the back panel of
Autark :
ID07
5
6
7
8
4 3
8888
1. Mains sockets / fuse
Here you connect the supplied
you can daisy-chain the mains to following devices. In addition, you
can replace the internal fuse here in case it should be blown due to
overload: use in every case a replacement fuse with identical specifi-
cations.
2. Menu and operating buttons
Autark ID07 is locally controlled via the buttons underneath the
display. Navigating the uppermost menu level is done via the

button and the and  buttons. For navigating the sub menu level,
press the ENTER button and again the
2
ENTER
button in order to open a menu item or to confirm your entry.
Press again the ENTER or
1
3.
WIRELESS SWITCH
This button activates the internal receiver of Autark
position, Autark ID07 can be controlled either via the supplied remote
control or via a wireless
DMX
9
DMX receiver is entered via the menu.
9
Nowsonic Autark ID07
User manual
power cable. Using the
IEC

and buttons. Press the

MENU button, to exit a sub menu.
ID07
transmitter: the address for the internal
GB
outlet
IEC
LED
MENU
. In the I