Herunterladen Inhalt Inhalt Diese Seite drucken

Operation Via The Menu - Nowsonic AUTARK ID07 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

www.nowsonic.com
Operation with battery
Autark
integrates a battery pack that is automatically charged
ID07
when connected to the mains. The battery pack allows for a battery-
backed operation for up to 10 hours. To operate Autark
batteries, just pull the mains plug before powering the unit: after
powering up, the current charging status of the battery pack is shown
via the
LED
s of the battery indicator.
In case of a malfunction, you can access and exchange the internal
battery pack via service cover on the back panel. Please contact first
the dealer from whom you have purchased the device.

Operation via the menu

You can operate Autark
either via the menu display on the back
ID07
panel or via the supplied remote control.
For menu operation proceed as follows:
Select the desired menu item by repeatedly pressing the
d
d
button. Alternatively, press the
desired menu item via the
Open the selected menu by pressing the ENTER button: the
d
d
current setting flashes in the display and can now be modified.
Finally, the display returns to the previously selected menu item.
d
d
ID07
MENU
button once and select the
dd
and
buttons.
dd
In order to adapt the settings, proceed as follows:
with
MENU
13
Nowsonic Autark ID07
User manual
Entering the
address
DMX
Using the
and
buttons, select the desired
d
d
address (A001 to A512).
Confirm your entry by pressing the
d
d
Choosing the Auto mode
Using the
and
buttons, select the internal program
d
d
(At01 to At20) or the m 1 A5t status (Master).
Confirm your entry by pressing the
d
d
Entering the speed for Auto mode
Using the
and
buttons, enter the desired speed
d
d
(SP00 = off, SP01 = maximum, SP31 = minimum).
Confirm your entry by pressing the
d
d
Choosing Slave mode
Using the
and
buttons, select the SLA entry to
d
d
operate the Autark
ID07
in Slave mode with another
Master device.
Confirm your entry by pressing the
d
d
Choosing the
DMX
channel mode
Using the
and
, select the desired
d
d
mode. The (K1, (K2, (K6 and (K9 options are available.
For more information about the
DMX
page 9.
Confirm your entry by pressing the
d
d
GB
DMX
ENTER
button.
ENTER
button.
ENTER
button.
ENTER
button.
DMX
channel
channels read from
ENTER
button.

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Nowsonic AUTARK ID07

Inhaltsverzeichnis