Nowsonic AUTARK ID07 Bedienungsanleitung Seite 12

Nowsonic Autark ID07
GB
User manual
Control via the supplied remote control
Autark is supplied with an IR remote control for direct control of
ID07
various menu functions. You can operate the following functions via
the controls of the remote:
Button
POWER
DMX
SLAVE
AUTO 1, AUTO 2
SPEED
SOUND 1, SOUND 2
UP, DOWN
STROBE
0, 1, 2, 3, 4, 6
5W, 7R, 8G, 9B
Function
Here you can switch on the remote.
Here you can activate the menu for entering the DMX address.
Here you can activate the menu for toggling between Master and Slave mode.
Here you can activate the menu for selecting Auto mode 1 or 2.
Here you can activate the SPEED menu for entering the speed in Auto mode.
Here you can activate the menu SOUND 1 or 2.
Using these two buttons, you can increase or decrease the current value in the active menu.
Here you can activate Strobe mode.
Using these buttons, you can enter numeric values in Program mode.
Using these buttons, you can select the corresponding color (white, red, green, blue).
12
www.nowsonic.com