Installation; Unpacking; Fitting; Electrical Connection - Electrolux EFCL 650 Gebrauchsanweisung

Installation

Unpacking

Check that the cooker hood has no damages.
Transportation damages should immediately be
reported to the company responsible for the
transportation.
Damages, faults and any missing parts or
documents should immediately be reported to the
retailer.
Take care of the packing materials so that small
children cannot play with them.
Min
Min
70 cm

Fitting

60 cm
The hood is to be mounted on the wall.
When installed, the hood must be not less than 60
cm. above electric burners or 70 cm. above gas or
mixed-fuel burners. Fig. 5.
The hood can be installed above these heights but
for optimum performance it should be installed at
Fig. 5
the distance quoted for the appropriate heat
source.

Electrical connection

(not for UK)
Safety warnings for the electrician
Before connecting the appliance to the power
supply, check that the voltage indicated on the
rating plate corresponds to the mains power supply
available. Appliances fitted with a plug can be
connected to any standard power socket within
easy access.
Should it be necessary to provide a fixed
connection, the hood must only be installed by an
electrician authorised by the local electricity board.
When installing, an omnipolar disconnector with a
distance of at least 3 mm between contacts must
be provided.
Fixed connection of the appliance must only be
carried out by an authorised electrician.
43