roco PluX16 Bedienungsanleitung Seite 14

CV Name
29 Configuration register
124 Special configuration
GB
112 Special configuration
If you wish to program additional CVs, repeat numbers 5.-9.
To stop the programming, switch the centre to "STOP" or enter the address "80" and briefly activate the
direction of travel change.
As a Motorola Digital Centre from Märklin
3)
and 80, the value "0" has to be entered via the address as "80".
Programming instructions for the Märklin
▸
No locomotives are to be on the tracks except the one which is to be programmed!
1. Press the ESC button
2. Select the menu item "New Loc"
3. Select the menu item "Database"
4. Select the article number "36330" with the rotary knob
5.
Press the ESC button
6.
Move to menu option (Change Locomotive") with the knob
7.
Choose menu option ("Address")
8.
Choose menu option ("Name")
Programming with the Märklin
1. Press the "ESC" button
2. Turn the rotary controller to the right until you reach menu item "CHANGE LOC"
3. Turn the rotary controller 2x to the left until you reach menu item "REG"
4. Turn the rotary controller until the required CV address flashes
5. Turn the rotary controller until the required CV value flashes
The decoder confirms the programming with a slight movement at the engine.
14
8010884920 V_2013.indd 14
Description
Analogue functionality
Bit Function
3 Deactivate analogue operation
Activate analogue operation
Braking distance
Bit Function
5 Deactivate braking distance
Activate braking distance
Type of braking distance
Function
Bit
6 Direct current braking distance
Alternating current braking distance
can only be programmed by entering numbers between 01
2)
"Mobile Station" and "Central Station"
2)
Mobile Station:
2)
Works Value
14
Change: 10
Value
0
4
0
Change: 32
Value
0
32
0
Change: 64
Value
0
64
07.03.2013 11:56:10