Adjusting The Balance - Tascam CD-GT1 Bedienungsanleitung

Adjusting the balance

Inputs Inputs
 e  has three input sources  e  has three input sources
 the  being played
 the guitar or microphone connect
ed to the
GUITAR/MIC IN
 any stereo input connected to the
LINE IN jack
 e fi rst and last of these cannot have
their input levels changed by the 
 but see below for details of how
to balance the  with the input
 se the level control of the device
connected to LINE IN
level of this source remember that
this source cannot be eff ected by
the s eff ects
 se the s INPUT
to adjust the level of the guitar or
mic before it is sent to the eff ect
 hen a menu is not selected you
can use the 5 and b keys to set
the relative balance of the guitar
or microphone but not the
IN source compared to the output
from the  player  is
8 8 8
— TASCAM CD-GT1 — TASCAM CD-GT1
jack
The MIX feature (5 and b
keys outside menu mode)
adjusts the balance betwen
input and CD
to adjust the
control
can be set to between
emember that this is only pos
sible when not in menu mode
 se the s menu system
LINE
to adjust the output level of the
eff ect
value
MIX
Use the INPUT control to
adjust the GUITAR/MIC IN
level
Use the OUTPUT
control to adjust
the overall level
to the LINE OUT
and headphones
and 
Outputs
–5 +5
 ere are two outputs the line and the
headphones  ese cannot have their
levels set seperately—use the
control to set the overall output level
Use the CD-GT1's menu
system to set the output
level of the internal effect
You can't adjust the
input level of LINE IN
with the CD-GT1
OUTPUT